What Does ‘FDA Approved Silicone’ Actually Mean?
April 21, 2026
The FDA does not approve silicone materials — it approves devices. Learn what 21 CFR 177.2600, USP Class VI, and ISO 10993 actually mean for medical-grade and food-grade silicone.
Injection Molding Knowledge Center
All Articles
What Is Side Action in Injection Molding? Types, Design Rules, and Manufacturing
Side action injection molding explained: slides, lifters, unscrewing actions, collapsible cores, four-stage cycle sequence, design guidelines, and manufacturing specifications.
Read More »
Why Clean Room Injection Molding Matters: ISO Standards, Classification, and Compliance
Learn clean room injection molding requirements, ISO 14644-1 classifications & compliance standards essential for medical device & optical part production.
Read More »
Why Is Injection Molding Good for High Volume Production?
Discover six reasons why high volume injection molding is the fastest, most cost-effective way to scale your production.
Read More »
High Temperature Injection Molding Tips
Need heat resistant parts? Explore the top resin picks for high temperature injection molding and improve your thermal performance.
Read More »
What Is Film Insert Molding? Process, Advantages, and Design Guide
Film insert molding explained: four-stage process, six advantages over painting, material compatibility, and design rules for decorated plastic programs.
Read More »
Precision Injection Molding for Small Parts: Process, Materials, Tolerances, and Applications
Complete guide to small part injection molding — tolerances (±0.01 mm), materials (LCP, PEEK, PPS), micro-screw equipment, process phases, applications, and supplier selection.
Read More »
Cavity Balance in Multi-Cavity Injection Molding: Technical Guide to Rheological Uniformity
Master cavity balance in multi-cavity injection molds: runner design, shear-induced imbalance, thermal control, cavity pressure monitoring, and Moldflow validation protocols.
Read More »
Medical Insert Molding: Process, Materials & Design Guide
Medical insert molding fuses metal inserts with biocompatible thermoplastics in one shot. Bond strength 15–40 MPa, IQ/OQ/PQ validation, ISO 13485. Materials guide, DFM rules, applications.
Read More »
What Is Co-Injection Molding? Process, Benefits, and Applications
Co-injection molding explained: sandwich structure, sequential vs. simultaneous process, cost benefits, material compatibility, limitations, and comparison to overmolding and two-shot molding.
Read More »
Design for Injection Molding: Guidelines and Tips& Defect Solutions
Master design for injection molding with our comprehensive guide: 10 core guidelines, tooling tips, and solutions for common defects—optimize part quality, reduce costs, and boost efficiency.
Read More »
Urethane Casting vs Injection Molding: Which One is Better?
Compare urethane casting vs injection molding for cost, speed, materials, and volume. Learn which manufacturing method is best for your project.
Read More »
Acetal(POM) Injection Molding: A Comprehensive Guide for Your Projects
Elaborate on the key process points and parameter configurations of acetal (POM) injection molding to provide professional guidance for the stable production of wear-resistant and high-rigidity products.
Read More »
The Complete Guide to Thermoplastic Injection Molding for Manufacturing Success
Learn how thermoplastic injection molding works, materials used, benefits, and how to choose the right manufacturing partner for high quality production.
Read More »
Blow Molding vs. Injection Molding: Deep Comparison
Learn how to choose between blow and injection molding. Discover the most effective molding method for producing plastic parts.
Read More »
Secondary Processes for Injection Molding: Enhancing Your Parts
Analyze the core methods and advantages of injection molding secondary processes to provide professional guidance for optimizing the surface quality and service performance of plastic parts.
Read More »
Injection Molding Machine Tonnage: How to Calculate the Right Clamping Force
Analyze the core basis and calculation methods for injection molding machine tonnage selection to guide the matching of suitable injection molding equipment for different projects.
Read More »
PVC Injection Molding: Everything You Need to Know
Learn how PVC injection molding works, its key benefits, common defects, and why Fecision is the ideal partner for high-quality custom PVC parts.
Read More »
LDPE Injection Molding: A Comprehensive Guide
Elaborate on the key process points and parameter settings of LDPE injection molding to provide professional guidance for the efficient molding of flexible plastic products.
Read More »
Understanding PBT Injection Molding for Plastic Parts
Analyze the key process points and adaptability of PBT injection molding to provide professional technical guidance for the efficient and stable production of plastic parts.
Read More »
A Complete Guide to Conformal Cooling Channels in Injection Molding
Unlock faster production cycles and higher quality parts with conformal cooling channels. Learn how this advanced technique revolutionizes injection molding efficiency.
Read More »
TPU Injection Molding: Properties, Process, and Best Practices
Unlock high-performance TPU injection molding. Find essential tips on drying requirements, mold cooling strategies, and optimizing your part design for elasticity and strength.
Read More »
Guide to PETG Injection Molding: Process and Benefits
Provide a comprehensive introduction to PETG injection molding process parameters and performance advantages to offer technical references for the production of food-grade and medical-grade plastic products.
Read More »
What Is Two Color Injection Molding?
Stop assembly: Learn how two color injection molding fuses two plastics into one durable, high-precision part, saving time and labor costs.
Read More »
Water Assisted Injection Molding: How WAIM Works, Benefits, and Industrial Applications
Learn how Water Assisted Injection Molding works, the benefits, materials, and industrial applications for faster, lighter, and high-precision production.
Read More »
Vacuum Casting vs Injection Molding: Key Differences, Advantages & Cost Comparison
Compare Vacuum Casting vs. Injection Molding. Learn the key differences, advantages and costs to choose the right process for your manufacturing needs.
Read More »
Thin Wall Injection Molding: A Complete Guide to Design, Materials and Applications
Learn the benefits of thin wall injection molding to achieve ultra-lightweight plastic parts and faster production, saving material and shortening cycle times.
Read More »
Silicone Overmolding: The Complete Guide to Process, Materials & Applications
Learn overmolding: how the two-shot process works, compatible materials (TPE, LSR) & design standards for creating multi-material parts efficiently.
Read More »
Medical Injection Molding Explained: How Precision Plastics Power Modern Healthcare
Medical injection molding produces precise, sterile plastic parts for healthcare. Learn the process, materials (PEEK to LSR), ISO 13485 requirements, and cleanroom standards.
Read More »
What Is Two Shot Injection Molding?
Discover two-shot injection molding: single-cycle, dual-material precision. Cut assembly costs and boost product strength now.
Read More »
Prototype Injection Molding: A Complete Guide To Fast And Accurate Prototypes
Discover how prototype injection molding helps you test designs fast. Discover the benefits and process steps of rapid injection moulding prototyping.
Read More »
TPE Injection Molding: The Ultimate Guide to Process, Applications, and More
TPE injection molding is the key to flexible, durable parts. Discover the comprehensive process, key design principles, and applications of TPE and TPU in our comprehensive guide.
Read More »
Large Part Injection Molding: Machine Specifications, Tonnage Calculation & Process Optimization
Large part injection molding guide: 500-1300 ton machine specifications, tonnage calculation formula (Projected Area × Clamp Factor), cooling strategies for thick-wall parts, shrinkage control, and DFM standards for industrial components.
Read More »
Injection Molding vs Extrusion Molding: Key Differences Explained
Choosing between injection molding and extrusion? Compare process, cost, geometry, and precision to select the right method for your plastic parts. Get the key differences explained.
Read More »
Discover the Key Advantages of Injection Molding
Understand the key advantages of injection molding, including efficient mass production and high precision, to provide references for project selection.
Read More »
Injection Molding vs Thermoforming: Key Differences & Comparisons
Learn the differences between injection molding’s elevated precision and cost-effective tooling of thermoforming. Use our guide to match your part with the appropriate manufacturing method.
Read More »
Automotive Plastic Parts: A Guide to Design, Materials, and More
Learn how automotive plastic parts drive vehicle efficiency, comfort, and design freedom. Explore key material applications and the critical steps for efficient production and finishing.
Read More »
Silicone Molding for Medical Devices: The Complete Manufacturing Guide
Master medical silicone molding: LSR processing, biocompatibility standards, cleanroom requirements & design tips for FDA-compliant device components.
Read More »
Optical Injection Molding: A Guide to Precision Molded Plastic Optics
Need plastic optics fast? Explore optical injection molding solutions for your high-volume production of precision plastic lenses, light guides, and other critical optical components.
Read More »
Undercut Injection Molding: Everything You Need To Know About Undercuts
Learn what an undercut in injection molding is, why it matters, and how injection mold undercut design impacts part quality.
Read More »
Practical Guide To PET Injection Molding
Discover how PET injection molding works, key temperatures, and applications. Discover the comprehensive PET injection molding process.
Read More »
PE Injection Molding: Guide To HDPE, LDPE, And LLDPE Applications
Complete PE injection molding guide: HDPE, LDPE, and LLDPE processing parameters, shrinkage control, defect troubleshooting, grade selection, and DFM rules.
Read More »
What Is Short Run Injection Molding?
Need plastic parts fast? This guide explains what short run injection molding is and how it offers a quick and cost-effective way to get high-quality parts for low-volume production.
Read More »
The Ultimate Guide to Clear Plastic Molding
Get this complete guide to clear plastic molding. You’ll learn about various materials like acrylic and polycarbonate, common applications, and the benefits of using this advanced manufacturing process.
Read More »
Complete Guide to Polystyrene (PS) Injection Molding
Need high-speed, low-cost plastic parts? This guide to PS injection molding explains everything from material selection to mold design. Learn the process for your next project with expert advice.
Read More »
How To Identify And Fix Common Injection Molding Defects
Learn how to identify and fix common injection molding defects. Explore causes and solutions with a practical troubleshooting guide.
Read More »
A List of Injection Molding Gate Types for Optimal Part Design
Learn how to choose the right injection molding gate type to optimize your part design! This guide covers different gate types, their pros, cons, and how to select the best one for your project to reduce defects and costs.
Read More »
Injection Molding Parameters: A Complete Guide
Get perfect plastic parts every time. This guide to injection molding parameters will help you optimize settings like temperature, pressure, and cycle time to improve quality and productivity.
Read More »
Splay In Injection Molding: Causes, Fixes, And Prevention
Fix splay defects in injection molding. Learn root causes, diagnostic patterns & proven solutions to prevent silver streaks in your molded parts.
Read More »
Injection Molding vs Compression Molding: Which Is Right for You?
Learn the key differences between injection molding and compression molding. Discover cost, process, and best use cases for projects.
Read More »
Glass Filled Nylon Injection Molding: Grades, Properties, Anisotropic Shrinkage, and Process Guide
Glass filled nylon injection molding guide: PA6-GF30, PA66-GF50 properties, anisotropic shrinkage, processing parameters, tool steel selection, and applications.
Read More »
How to Improve Color Consistency in Injection Molding: 5 Best Ways
Learn 5 effective ways to maintain perfect color consistency in injection molding. Solve common challenges and ensure high-quality, uniform results.
Read More »
Understanding the Phases of Injection Molding Cycle
Injection molding cycle involves several key phases. This guide explains each step, factors that affect cycle time, and practical ways to improve efficiency and part quality.
Read More »
What Are Ejector Pin Marks: Impact, Causes, & Prevention.
What ejector pin marks are in injection molding? Explore their causes, effects on product quality, and proven prevention methods.
Read More »
Injection Molding Tolerance Control: From Design to Production
Discover the key factors affecting injection molding tolerances, types of tolerances, and proven tips to control size variations for precise, high-quality plastic parts.
Read More »
What Is Rapid Injection Molding: Definition, Procedure & Benefits
Learn what rapid injection molding is, how the process works, the materials used, and why it is beneficial to create prototypes and low-volume parts.
Read More »
What Is Gas Assist Injection Molding? A Complete Process Guide
Gas assisted injection molding uses nitrogen at 2,000–4,500 psi to create hollow cores, cut material use by 20–40%, and eliminate sink marks. Process guide with parameters.
Read More »
Automotive Injection Molding: What Do You Need to Know About It?
Learn how automotive injection molding works, its benefits, common applications, and materials used to create durable, cost-effective, and high-quality vehicle parts.
Read More »
Common Causes of Burn Marks in Injection Molding and Prevention Tips
Trapped air, malfunctioning equipment, and poor material selection may cause burn marks in injection molding. Learn about mold design, equipment issues, and material handling to ensure defect-free plastic parts.
Read More »
All About Aerospace Injection Molding: A Complete Guide
Explore the world of aerospace plastic injection molding. This guide covers everything from material selection and precision manufacturing to common parts used in modern aviation.
Read More »
What Is Mold Temperature in Injection Molding?
What is mold temperature, and how does mold temperature affect in injection molding? Here is a complete guide from explanation to useful handling tips. Read on.
Read More »
What Is Reaction Injection Molding (RIM)?
Encounter Reaction Injection Molding to build strong, lightweight, and intricate parts. Find the process, benefits, and material types.
Read More »
Global Top 10 Injection Molding Machine Manufacturers in 2025
Find the right injection molding machine for your needs. Check out our roundup of Top10 Injection Molding Machine Manufacturers, covering types, technical parameters, and more.
Read More »
What Are Black Specks in Injection Molded Parts?
Ever squint at a plastic part and spot tiny black dots? What are they? Where are they from? Let’s dig into these pesky black specks—because they’re more than just eyesores.
Read More »
What Is Demolding in Injection Molding?
Understand what demolding is when it comes to injection molding. A proper demolding will minimize defects, improve production speed and cost for your high-quality plastic parts.
Read More »
How Does an Injection Molding Machine Work
Wondering how an injection molding machine works? Learn the process: clamping, injection, cooling—key stages in plastic part production.
Read More »
How to Estimate Injection Molding Costs: A Complete Guide for Buyers and Designers
Injection molding cost breakdown: mold, resin pricing by grade, machine rates, and 6 proven strategies to reduce tooling and per-part costs without sacrificing quality.
Read More »
What Is Shut Off in Injection Molding?
What if a single gap ruined your parts? Injection mold shut offs are precision steel seals that stop molten plastic leakage, slashing rework costs for medical batches or auto line shutdowns. Mold integrity, guaranteed.
Read More »
How to Reduce Flow Marks in Injection Molding?
Learn how to eliminate flow marks in injection molding. Discover causes and effective solutions to achieve high-quality, defect-free plastic parts.
Read More »
How To Avoid Voids In Injection Molding: A 2025 Guide
Discover key strategies to avoid voids in injection molding: adjust pressure, temperature, cooling. Fix design/material issues, refine processes for defect-free parts.
Read More »
What is Slider in Injection Molding?
Discover what a slider in injection molding is, how it works, its components, types, and applications. Learn how sliders solve undercut challenges in mold design for precision part production.
Read More »
What is Warpage in Injection Molding: Causes, Prevention, and Impact
Discover warpage in injection molding: its causes, prevention techniques, and impact on part quality. Learn how material, process, and mold design affect warpage and how to ensure high-quality plastic parts.
Read More »
What Causes Short Shots in Injection Molding
Discover why short shots occur in injection molding and how Fecision’s solutions prevent defects with simple, effective strategies.
Read More »
How Does Overmolding Work | Everything You Need to Know
Discover how overmolding works to create multi-material injection molded parts with enhanced functionality and design flexibility.
Read More »
How to Avoid Silver Streaks in Injection Molding
Learn how to Avoid silver streaks in injection molding by controlling temperature, injection speed, material drying, mold cleaning, and using quality resins for better parts.
Read More »
Overmolding vs Insert Molding: Key Differences, Materials & How to Choose
Overmolding adds soft functional layers over a plastic substrate. Insert molding embeds metal or components in plastic. Comparison table, material guide, DFM tips, and decision framework inside.
Read More »
How to Avoid Weld Lines in Injection Molding?
Learn how to effectively prevent weld lines in injection molding. Discover expert tips on part design, mold adjustments, and process optimization to achieve strong, flawless plastic parts.
Read More »
What Causes & How to Avoid Flash in Injection Molding?
Struggling with injection molding flash? Understand the root causes of excess plastic and implement proven methods to achieve perfectly molded components.
Read More »
Overmolding Injection Molding: Technical Process, Material Compatibility & Design Standards
Overmolding injection molding guide: two-shot process parameters, TPE/TPU material compatibility matrix, bonding strength data, DFM guidelines, and industry standards for medical/automotive applications.
Read More »
How Does a Hot Runner Work? Understanding the Hot Runner Injection Molding Process
Discover how Hot Runner injection molding works, its components, benefits, and ideal use cases for efficient, high-volume plastic production.
Read More »
How to Reduce Shrinkage in Injection Molding
Learn how to reduce shrinkage in injection molding with tips on material selection, mold design, and process optimization for better accuracy.
Read More »
LSR Injection Molding vs. HCR Injection Molding: A Complete Guide for Medical Use
LSR injection molding vs HCR: cycle time, tooling cost, medical grade specs and a clear decision framework. Engineering data from Fecision’s silicone molding team.
Read More »
Say Goodbye to Defects: How to Prevent Air Bubbles in Plastic Injection Molding
Learn expert tips to prevent air bubbles in plastic injection molding with smart design, proper drying, and expert troubleshooting. Achieve flawless, durable parts.
Read More »
Parting Line in Injection Molding: Understanding Its Impact on Design Optimization
Unravel the mystery of the parting line in injection molding! This article explores its definition, formation, various types, and crucial design considerations to optimize your plastic part development.
Read More »
Understanding Cooling Time in Injection Molding: A Key Factor in Production
Optimize your production process by understanding cooling time in injection molding. Learn about different methods and techniques to optimize cooling time.
Read More »
What Is Insert Molding? Process, Design Rules & Applications
Insert molding places a metal insert into a mold before injection, bonding plastic and metal in one cycle. Pull-out force up to 4.5 kN. DFM rules, materials, and applications explained.
Read More »
Hot Runner Injection Molding vs Cold Runner Injection Molding: A Guide for Beginners
Explore hot runner vs cold runner injection molding. Learn the key differences, pros, and cons of choosing the right process for your plastic parts manufacturing.
Read More »
Optimal Wall Thickness Guidelines in Injection Molding
Why does injection molding wall thickness decide if your design sinks or swims? Want parts that survive real-world chaos? Nail the Goldilocks zone: balanced walls, smart ribs, and material mastery. Your mold’s counting on it.
Read More »
How to Avoid Sink Marks in Injection Molding?
Learn how to prevent sink marks in injection molding with expert tips on material selection, design optimization, and processing techniques.
Read More »
Can EPDM Rubber Be Injection Molded?
Modern injection molding technology allows EPDM rubber to transform into complex shapes efficiently. Want to know exactly how to do it? Can EPDM rubber be injection molded?
Read More »
How Does Injection Molding Work?
Learn how injection molding works, its parts, step by step process, material options and applications in modern manufacturing.
Read More »
What Is Precision Injection Molding? A Comprehensive Guide
Discover precision injection molding, its process, benefits, applications, and how it ensures high accuracy in manufacturing complex plastic components.
Read More »
What Is Micro Injection Molding?
Discover what micro injection molding is, how it works, its applications, benefits, and why it’s essential for producing precise, tiny components in various industries.
Read More »
How Long Does Injection Molding Take?
Are you wondering how long injection molding takes? In general, it depends on the material, mold design, and cycle time. Here’s more about it in detail.
Read More »
Can PEEK Be Injection Molded?
Can PEEK be injection molded? Let’s find out more about PEEK injection molding, material preparation, temperature control, and challenges associated.
Read More »
Complete Guide to LSR Injection Molding for Medical Devices
LSR injection molding injects platinum-cured silicone at 100–1,000 bar into a 170–230°C mold, curing in 30 s–2 min. Complete guide: process, Wacker grades, FDA/ISO compliance.
Read More »
3D Printing vs. Plastic Injection Molding: Which Manufacturing Method Reigns Supreme?
Compare 3D printing and plastic injection molding to find the best manufacturing method for your project. Discover costs, advantages, and key differences
Read More »
Choosing the Right Injection Molding Process for Your Manufacturing Needs
Discover different injection molding types, including overmolding, gas-assisted, and metal injection molding. Learn how to select the right process for cost-effective, high-quality manufacturing.
Read More »
Injection Molding Materials: An In-Depth Look at Common Plastics and Their Uses
Discover the most common plastics used in injection molding, their properties, and ideal applications to help you choose the right material.
Read More »
A Complete Guide to Injection Molding Machines: What You Need to Know?
Learn more about injection molding machines, their role and how they work, but also the major brands you should choose from!
Read More »
An Introduction to Injection Molding: The Key to Efficient and Precise Manufacturing
Explore the injection molding processes, types, materials, benefits, limitations, applications, standards, and factors influencing the cost of it.
Read More »
Are Thermosets Suitable for Injection Molding?
Explore the ability to injection mold thermosets. Our in-depth article covers the key considerations and process details for this unique application.
Read More »
Can Rubber Be Injection Molded?
Can rubber be injection molded? Yes! Uncover the process, applications, and advantages of rubber injection molding.
Read More »
Can Polypropylene Be Injection Molded
Can polypropylene be injection molded? Uncover the answer and explore the advantages of using this durable thermoplastic.
Read More »
Can Polycarbonate be Injection Molded
Can polycarbonate be injection molded? Explore the capabilities and advantages of using this versatile material.
Read More »
Can Nylon Be Injection Molded
Can nylon be injection molded? Uncover the properties and advantages of using nylon in the injection molding process.
Read More »
Can You Injection Mold HDPE Plastic? A Quick Guide
Examine the feasibility of injection molding HDPE. Gain insights into the applications, advantages, and limitations of using HDPE in injection molding.
Read More »
Can PLA Be Injection Molded? Complete Guide
Interested in injection molding PLA? Our article examines the feasibility, process, and applications of using PLA in injection molding.
Read More »
Can ABS Be Injection Molded? Process & Benefits
Discover the process of can abs be injection molded. Explore the benefits and applications of this manufacturing technique.
Read More »
Can Delrin Be Injection Molded
Can Delrin be injection molded? Discover the benefits and applications of this versatile engineering plastic.
Read More »
Can Acrylic Be Injection Molded? Process Guide
Explore the ability to injection mold acrylic – learn about the methods, benefits, and applications of this manufacturing process.
Read More »
Is Injection Molding Considered Additive Manufacturing?
Wondering if injection molding is part of additive manufacturing? Let’s discover the differences between the two and why injection molding is the top choice.
Read More »What Does ‘FDA Approved Silicone’ Actually Mean?
The FDA does not approve silicone materials — it approves devices. Learn what 21 CFR 177.2600, USP Class VI, and ISO 10993 actually mean for medical-grade and food-grade silicone.
Read More »
What Are Injection Mold Coatings? Understanding the Basics
Discover the best injection mold coatings to stop corrosion and cut cycle times in high-volume manufacturing.
Read More »
A Complete Guide to Prototype Injection Molds: Process, Materials, and Benefits
Get production-grade plastic parts in days using prototype injection molds. Validate designs, cut market risk, and save capital before committing to full tooling.
Read More »
Injection Mold Runner Design Basics: Types, Functions, and Best Practices
Learn the basics of injection mold runner design, including types, functions, and best practices to improve flow balance, part quality, and production efficiency.
Read More »
What Is Family Mold? Types, Design & Applications
Discover the cost and time savings of family injection mold strategy. Learn types, design rules, and applications for efficient, high-quality production of multi-part plastic assemblies.
Read More »
Steel vs. Aluminum Injection Molds: What are the Differences?
Aluminum vs. steel injection molds? Uncover the core differences in thermal speed, cost, and durability to pick the right metal and multiply your project’s long-term margin.
Read More »
10+ Questions to Ask Before Picking Injection Mold Manufacturers
Stop wasting money on bad molds. Use these 10+ key questions to vet any injection mold manufacturer, avoid five-figure re-tooling costs, and secure your project’s success.
Read More »
What Is Feeding System in Injection Mold?
Master injection molding feed system design. This guide covers sprue sizing, runner balancing, gate freeze-off, and choosing the perfect hot, cold, or insulated runner for efficiency.
Read More »
SPI Mold Classification: 5 Injection Mold Classifications
Understand the SPI mold classification system and master the division standards and application scenarios of the 5 injection mold types.
Read More »
What is Rapid Tooling? How It Works and Its Advantages
Understand the definition, specific operation process and outstanding advantages of rapid tooling to select a suitable tooling solution for your project.
Read More »
Mold Design for Insert Molding: Material Selection, Geometry Rules, and DFM Specifications
Complete insert molding mold design guide: material selection tables, 9 geometry rules with dimensions, bond promoters, pre-design checks, and quantified design specifications.
Read More »
Injection Mold Gate Design: The Complete Basics to Get Started
The gate is your profit lever. Discover the complete guide to injection molding gate design, covering every type, troubleshooting defects, and advanced strategies for optimized tooling.
Read More »
Beyond the Basics: Advanced Mold Tooling for Complex Electrical Terminals and Interconnects
Explore the world of Mold Tooling for sophisticated electrical components. Get insights into manufacturing molds for complex geometries and thin materials with Fecision’s expertise.
Read More »
Designing for Durability: Advanced Materials and Coatings for High-Performance Mold Components
Explore how advanced materials and coatings boost mold part durability, reduce maintenance, and enhance part quality. Contact Fecision for custom mold component manufacturing.
Read More »
The Future of Robotics Industry: Precision Mold Tooling for Next-Gen Innovation
You need high-quality molded parts for your robotics projects. Our precision mold tooling services deliver intricate, reliable components for the evolving robotics industry and EOAT needs.
Read More »
What Is Multi Cavity Mold in Injection Molding?
Get familiar with the multi cavity mold in injection molding. This tool reduces cost and production time, making it the ideal process for manufacturing plastic parts in high volumes.
Read More »
The Critical Role of Precision Molds in High-Reliability Connectors for Automotive and Aerospace
Discover how Fecision’s precision molds ensure high-reliability connectors for automotive and aerospace. Learn about stringent demands, advanced materials, and quality standards.
Read More »
Two Plate Mold vs Three Plate Mold: What’s the Difference?
Understand two plate and three plate molds for injection molding. This guide explains their structure, advantages, and disadvantages to help you pick the right mold for your part.
Read More »
What Is an Injection Mold Base?
Injection mold bases are the core of your tooling. Explore this guide on mold base materials, design considerations, and types to optimize your part quality and costs.
Read More »
Aluminum Injection Mold: Benefits, Comparison, and Manufacturing Guide
Learn how aluminum injection molds speed production, cut costs, and compare to steel. Discover the benefits and how to make molds.
Read More »
Effective Maintenance of Injection Molds for Better Performance
Learn the importance of Maintenance of Injection Molds for optimal performance. Discover tips and best practices to extend mold lifespan and improve product quality.
Read More »
Soft Tooling vs Hard Tooling: Choosing the Right Path for Your Project
Deciding between soft tooling vs hard tooling? Our guide breaks down the pros, cons, and ideal applications for each manufacturing method to help you make an informed choice.
Read More »
Single Cavity vs Multi Cavity Mold: Which Is Best for Your Production?
Compare single cavity vs multi cavity mold to choose the right solution for your production needs. Learn cost, speed, and design factors.
Read More »
The Ultimate Guide to Mold Texturing for Injection Molding
Understand mold texturing: its role in injection molding, manufacturing process, and surface texture types. Learn about standards and costs.
Read More »
What Are Electrodes in Mold Manufacturing?
Discover the key to high-precision EDM with our guide to electrodes. Explore the different materials and designs that ensure perfect molds every time.
Read More »
Injection Molding Lifter Design: A Full Guide
Master injection molding lifter design with this guide. Explore lifter mechanisms in injection molding, their types, and best design tips. Partner with Fecision for expert lifter solutions.
Read More »
Understanding Sprue in Injection Molding: Types and How to Use
Uncover the specifics of sprue in injection molding process. By following practical steps, you can improve operations and address common issues.
Read More »
How Much Does an Injection Mold Cost?
For plastic product manufacturers, knowing what drives injection molding cost is crucial. This article explores the complexities of injection mold costs, highlighting factors that shape total costs. Understanding these helps optimize costs for your project.
Read More »
What is a Draft Angle in Mold Design?
Learn what draft angles are in mold design, their importance, and how to calculate them for smooth production.
Read More »
What is a Mold Trial? A Simple Guide to Mold Trials in Manufacturing
Discover what a mold trial is, its types, steps, and why it’s key to quality control. Learn how mold trials cut defects and boost efficiency in manufacturing.
Read More »
Mold Lifespan Explained: How Long Does Mold Last? The Complete Life Cycle of a Mould
Do you want to know how long a mold really lasts? It’s not a straightforward answer. Mold lifespan depends on many factors, from materials to maintenance. Let’s dive into its life cycle.
Read More »
What Are the Types of Injection Molds?
What are the various types of injection molds? Study designs by feeding system, cavities, and plates to gain knowledge that will help you determine the right mold to effectively create plastic parts with high quality.
Read More »
How to Design a Mold for Plastic Injection
Learn how to design molds for plastic injection molding with key tips on flow, cavity and core design, cooling, ejection, and material selection for quality parts.
Read More »
What is Core in Injection Molding
Learn the role of the core in injection molding, its types, design considerations, and how it works with the cavity to produce precise plastic parts.
Read More »
Venting in Injection Molding: Where to Vent, How to Design It, and Why It Fails
Complete guide to injection molding venting: vent depth by resin, six placement zones, eight venting methods, defect-to-root-cause table, and design specifications.
Read More »
Everything You Need to Know About Valve Gate in Injection Molding
Unlock superior plastic parts with valve gate injection molding. Learn how precise control, reduced waste, and enhanced aesthetics make it the ideal choice for high-quality production.
Read More »
How to Clean Injection Molds the Right Way: Step-by-Step Guide
Are you looking to clean injection molds? Learn how to do it the right way to prevent defects, extend mold life, and reduce production downtime.
Read More »
What is a Mold Cavity: A Complete Guide to Injection Molding Cavities
Learn what a mold cavity is in injection molding, its types, roles, and how it impacts product shape, quality, and production efficiency.
Read More »
How Porous Metal Improves the Injection Molding Venting System
Boost injection molding efficiency and quality. Discover how porous metal improves venting, reduces defects, and extends mold life.
Read More »
What Are Injection Molding Inserts and How Do They Work?
Do you know what injection molding inserts are? Here you will learn how these inserts work to improve design, functionality, and efficiency in molding.
Read More »
What Is the Return Pin for Mold?
What is a return pin for mold? Explore its function in return pin injection molding, different types, material choices, and why quality mold components are essential for efficient production.
Read More »
Injection Molding Slider vs Lifter: What Are the Differences?
What are the differences between injection molding sliders and lifters? Expert insights for better mold design and performance. You won’t be confused after reading!
Read More »
Plastic Injection Mold Tool Steel: Which One Suits Your Needs Best?
Confused about which injection mold tool steel to use? Discover the best options for durability, cost, and performance, customized to your project’s needs.
Read More »
Role of Locating Ring in Injection Molding: What You Should Know
Do you know why a locating ring in injection molding is used and why it is essential for precision? Discover its role in ensuring accurate mold alignment.
Read More »
The Injection Mold Cooling System: Function, Design, and Importance
Maximize efficiency with the right Injection Mold Cooling System. Learn key design tips, components, and maintenance for top performance.
Read More »
Injection Molding Uncovered: What is a Sprue Bushing?
Learn what a sprue bushing does, types available & design best practices. Discover how this critical component impacts injection molding quality.
Read More »
Guide Pins in Molds: Their Indispensable Purpose Decoded
Guide pins are the driving force behind seamless injection molding. Learn how they ensure precise alignment, reduce wear, and improve operational efficiency.
Read More »
The Crucial Role of Core Pins in Injection Molding: An In-Depth Look
Unlock the secret to perfect plastic parts! Discover how core pins, the unsung heroes of injection molding, craft intricate details and hollows. Learn about materials, custom vs. standard, and find the best manufacturer for your precision needs!
Read More »
Choosing the Perfect Metal for LSR Injection Mold: A Comprehensive Guide
Discover the best metals for your LSR Injection Mold. Ensure durability, precision, and cost-efficiency with expert material selection tips.
Read More »
Ejector Pin vs Ejector Sleeve: Unraveling the Key Distinctions in Injection Molding
Compare ejector pins vs sleeves: design differences, functions & when to use each. Optimize your injection molding process for clean, damage-free part ejection.
Read More »
Ejector Systems in Injection Molding: Key Components and Their Role
Discover how ejector systems in injection molding work, their key components, and why they’re essential for fast, damage-free plastic part production.
Read More »
What is the Difference Between a Core Pin and an Ejector Pin?
Here, we have discussed Core Pin vs Ejector Pin in terms of 1. location, 2. function, 3. movement, 4. material, 5. design, 6. temperature management …
Read More »
What is the Difference Between Hot Runner and Hot Sprue?
Hot runner vs hot sprue: compare costs, efficiency & part quality. Discover which injection molding system best fits your production requirements.
Read More »
What is a Hot Runner in Injection Molding?
Explore the intricacies of hot runner systems in injection molding. Learn everything from their design and operation to their advantages over cold runner systems.
Read More »
The Importance of A nozzle in Injection Molding
Learn the importance of a nozzle in injection molding, its role in the process, and why it’s crucial for successful plastic part production.
Read More »
Parts and Components of an Injection Mold: Function, Material & Design Guide
Master injection mold components: cavity, core, ejector system & more. Learn each part’s function, material choices & design best practices.
Read More »
What Is Hot Runner Mold?
Discover the different types of hot runner injection molding systems, their key benefits and limitations, and expert tips for selecting the best solution for your manufacturing needs.
Read More »
What Are Ejector Pins in Injection Molding?
Ejector pins ensure smooth part removal in injection molding. Discover key design principles and proven solutions to prevent ejector pin marks for flawless production.
Read More »
How to Make an Injection Mold: A Beginner’s Guide
Are you looking for a way to make an injection mold? Here’s a step-by-step guide, from design to manufacturing, which you can follow to make one.
Read More »
How Long Does Injection Mold Last?
Are you wondering how long an injection mold lasts? Discover the average lifespan of injection molds and the factors that affect the lifespan.
Read More »
Injection Mold Tooling Guide: Types, Design, Materials & Troubleshooting
Learn about injection mold tooling, including its types, design principles, materials, and troubleshooting methods to enhance manufacturing precision and efficiency.
Read More »
What Are the Strongest Plastics for Injection Molding?
Compare the strongest plastic for injection molding options. Choose high-impact materials to protect your most sensitive industrial designs.
Read More »
Is Delrin the Same as Acetal: Key Differences Explained
Elaborate on the compositional characteristics and application differences between Delrin and acetal to facilitate the precise selection of suitable materials based on operating conditions.
Read More »
Discover PC Plastic: Properties, Processing Methods, and Uses
Learn about PC Plastic: its properties, processing methods, and common uses. Discover if PC Plastic is safe and recyclable in our ultimate guide.
Read More »
PLA Plastic: What You Need to Know About Polylactic Acid
Discover the ultimate guide to PLA Plastic, exploring its properties, advantages, and applications. Learn about its biodegradability and uses in various products.
Read More »
PS Plastic: Types, Properties, and Applications Explained
Get to know PS Plastic: its properties, applications, and comparison with other plastics like polypropylene. Your ultimate resource.
Read More »
PE Plastic Guide: Properties, Processing, and Applications
Get the inside scoop on PE Plastic with our comprehensive guide. Explore its benefits, types, and applications, and understand how it’s processed and recycled.
Read More »
Understanding Thermoplastic Elastomer (TPE): Properties and Applications
Learn about TPE properties, processing advantages & real-world applications. Discover why thermoplastic elastomer replaces rubber and PVC in modern products
Read More »
TPU Plastic: A Comprehensive Guide for Your Projects
Discover the versatility of TPU Plastic, a flexible and durable material used in various applications. Learn about its properties, advantages, and processing methods in our comprehensive guide.
Read More »
PBT Plastic: Characteristics, Processing, and Uses
Your comprehensive guide to PBT Plastic: characteristics, processing, and uses. Discover the advantages and limitations of PBT Plastic in plastic injection molding.
Read More »
HDPE vs ABS: Which Material is Right for Your Project?
HDPE vs ABS: full property comparison, injection molding parameters, shrinkage data, chemical resistance, and a 10-point selection guide for engineering applications.
Read More »
Is ABS Safe for Your Application? ABS Plastic Guide
Discover if ABS plastic is safe for your application. Learn about its characteristics, uses, and safety benefits in our ultimate guide.
Read More »
Understanding Plexiglass vs Acrylic: Differences & Uses
Discover the differences between Plexiglass and Acrylic. Learn about their characteristics, manufacturing process, and applications to make informed decisions for your projects.
Read More »
Types of Nylon: A Guide to Nylon Plastics and Applications
Discover the different types of nylon and their applications in plastic injection molding. Learn about properties, manufacturing, and environmental impact.
Read More »
Discover the Different Types of PVC Plastic and Their Uses
Learn about the different types of PVC, their key properties, and applications. Get insights into the advantages and disadvantages of PVC plastic.
Read More »
PEEK Plastic: High-Performance Polymer for Demanding Applications
Discover the ultimate guide to PEEK Plastic, a high-performance polymer for demanding applications. Learn about its properties, processing, and applications.
Read More »
Polypropylene vs Polycarbonate: Injection Molding Properties, Processing, and Selection Guide
Polypropylene vs polycarbonate for injection molding: side-by-side properties, processing parameters, shrinkage, living hinge, chemical resistance, sterilization, and a 12-point selection guide.
Read More »
Food Grade Plastic Parts: Safe Manufacturing for Your Needs
Discover the importance of Food Grade Plastic in manufacturing. Learn about types, uses, and the difference between food-grade and food-safe plastics for your needs.
Read More »
Choosing Between Polypropylene vs Polyethylene for Custom Parts
Learn about Polypropylene vs Polyethylene: their key similarities and differences, manufacturing methods, and industrial uses to choose the right material for your custom parts.
Read More »
ABS vs PVC Plastic: Key Differences & Best Uses
Discover the key differences between ABS and PVC plastics, their best uses, and how to recycle them. Learn when to use ABS vs PVC for your custom plastic parts.
Read More »
PET vs PETG: Properties, Pros, Cons, and Uses Compared
Discover the differences between PET and PETG, including their properties, pros, cons, and uses. Learn how to choose the right material for your project.
Read More »
UV Resistant Plastics Options for Injection Molding
Explore the best UV Resistant Plastics for injection molding. Find out how to improve UV resistance and choose the right plastics for your projects.
Read More »
Nylon 6 VS Nylon 66: Key Differences and Applications Explained
Discover the key differences between Nylon6 and Nylon66, including properties, manufacturing, and applications to choose the right material for your projects.
Read More »
PETG vs ABS: Injection Molding Properties, Processing, and Selection Guide
PETG vs ABS: Compare critical properties—strength, clarity, heat resistance & moldability to choose the right material for injection molding.
Read More »
POM Plastic (Acetal Polymer): Key Properties and Advantages
Discover the ultimate guide to POM Plastic, covering key properties, advantages, and processing techniques for acetal polymer applications. Learn more about POM Plastic processing and its uses.
Read More »
Polymethyl methacrylate (PMMA): A Comprehensive Guide
Discover PMMA acrylic properties, applications & processing methods. Learn why polymethyl methacrylate is the top glass alternative across industries.
Read More »
PET Plastic: Exploring Its Properties, Grades, and Uses
Learn 5 effective ways to maintain perfect color consistency in injection molding. Solve common challenges and ensure high-quality, uniform results.
Read More »
Polycarbonate vs Acrylic: Material Comparison for Custom Parts
Polycarbonate vs Acrylic: Which is best for your custom parts? Compare their properties, manufacturing options, and common applications to choose the right material.
Read More »
Understanding Acrylic Melting Point for Various Applications
Learn about the acrylic melting point, its importance, and applications in various industries. Find out how it affects the use of acrylic in different fields.
Read More »
TPU vs TPE: Key Differences and How to Choose
Confused between TPU vs TPE? Learn about their unique properties, typical applications, and how to select the most suitable one for your needs.
Read More »
LDPE vs HDPE: Choosing the Right Plastic for Your Projects
Discover the differences between LDPE vs HDPE plastics and choose the right material for your projects. Learn about their properties, processing, and applications.
Read More »
Guide to Heat Resistant Plastic: Properties, Manufacturing, and Uses
Discover the ultimate guide to Heat Resistant Plastic, exploring its properties, manufacturing processes, and applications in high-temperature environments for your product needs.
Read More »
Thermoset vs Thermoplastic: Key Differences and Applications Explained
Discover the key differences between Thermoset vs Thermoplastic materials, their pros, cons, and applications. Learn which one is best for your plastic injection molding project.
Read More »
Understanding Nylon Melting Point for Injection Molding
Understand the nylon melting point and its impact on your injection molding projects. Compare high and low melting point nylon and their uses in various industries.
Read More »
Understanding Polycarbonate Melting Point
Learn about polycarbonate melting point, its significance in manufacturing, and how it affects the performance of your final products.
Read More »
HDPE Melting Point: What You Need to Know for Manufacturing
Understand the hdpe melting point and its role in industrial applications. Explore its differences with LDPE, factors influencing its melting point, and its uses.
Read More »
Polypropylene Melting Point: Key to Effective Plastic Manufacturing
Understand polypropylene melting point and its role in effective plastic manufacturing processes, including injection molding.
Read More »
Understanding PETG Melting Point for Your Manufacturing Needs
Discover the PETG melting point and its impact on your manufacturing process. Learn the pros, cons, and applications in our ultimate guide.
Read More »
PVC Melting Point: Key to Effective Processing and Manufacturing
Understand PVC melting point and its role in product manufacturing. Explore factors affecting it, comparison with other thermoplastics, and safety considerations.
Read More »
Silicone Rubber Melting Point: Temperature Ranges, Degradation, and Manufacturing Guide
Does silicone rubber melt? Learn about thermal degradation temperatures, heat resistance limits & how temperature affects performance in manufacturing.
Read More »
ABS Melting Point: How Temperature Impacts Processing and Properties
Learn ABS melting range (105-115degC), processing temperatures & how heat affects properties. Optimize injection molding & 3D printing parameters.
Read More »
Polyamide vs Nylon: Key Differences Explained
Discover the differences between Polyamide vs Nylon, including their composition, uses, and properties. Learn which one is best for your manufacturing needs.
Read More »
ABS Plastic: Properties, Types and Applications
Discover ABS plastic properties, types & why it dominates industries from automotive to consumer goods. Complete material guide for engineers & buyers.
Read More »
Polypropylene plastic: Key Benefits and Common Uses
Get to know Polypropylene: its key properties, different types, and uses. Explore the advantages and disadvantages of this versatile plastic material.
Read More »
Polyamide vs Polyester: Properties, Injection Molding, and Application Guide
Polyamide vs polyester: compare durability, moisture resistance & cost. Find the right material for your application with our expert guide.
Read More »
Silicone vs. RTV Silicone: What’s the Real Difference?
RTV silicone is a subtype of silicone — not a separate material. Learn how curing method, pot life, and production scale determine which to use for molding, sealing, or repair.
Read More »
Platinum Grade Silicone vs. Medical Grade Silicone: What Actually Separates Them
Platinum grade and medical grade silicone are not the same thing. Learn the curing chemistry, regulatory standards, and application differences — with a clear decision framework.
Read More »
Precision Connector Molding: Design Guide for Engineers
Engineering guide to precision connector injection molding: LCP/PPS/PEEK material selection, processing parameters, tolerance tiers, mold design, insert molding, and defect solutions.
Read More »
Packaging Injection Molding Explained: Processes, Materials, and Benefits
Learn how packaging injection molding works, key materials, and major benefits. Discover why it’s essential for high-volume, precise, and sustainable packaging.
Read More »
Precision Connector Mold Manufacturing: How Fecision Delivers Micro-Tolerance Parts for Demanding Applications
Fecision’s precision connector mold manufacturing: ±0.005 mm CNC/EDM, LCP/PPS/PEEK expertise, ISO 9001 & ISO 13485 certified. Automotive, telecom, aerospace, and medical connectors.
Read More »
Plastic Enclosure Design for Injection Molding: 10+ Guides to Consider
11 DFM rules for injection-moulded plastic enclosures — wall thickness, draft angles, rib geometry, tolerances, material selection (ABS/PC/PP), snap fits, EMI, and IP ratings.
Read More »
Electronics Injection Molding: Everything You Need to Know
Here is an overview of electronics injection molding, showcasing various applications and the process controls required to achieve micron-level precision in high-volume production.
Read More »
Plastic Injection Molding for Chemistry Reagent Discs: How Manufacturing Precision Defines Diagnostic Accuracy
How injection molding produces chemistry reagent discs — microfluidic tolerances (±0.01mm), material selection (PC, COC, COP), cleanroom standards, and quality requirements explained.
Read More »
Vapor Polishing for Plastic Parts: Process and Benefits
Understand the processing flow and application value of vapor polishing for plastic parts to provide a reference for efficient surface treatment solutions for precision plastic components.
Read More »
Mold Polishing Techniques And Standards For Perfect Surface Finish
Learn mold polishing techniques, standards, and best practices for perfect surface finish, durability, and plastic injection mold quality.
Read More »
A Guide to Different Types of Injection Mold Textures
Explore the realm of injection mold textures with this deep dive. Understand how they work to improve the aesthetics, function, and durability of your product across many industries.
Read More »
Screen Printing for Plastic Parts: Process, Benefits, Types, and More
Learn everything about screen printing for plastic parts. This guide covers the process, benefits, different types of screen printing, and even how to remove prints.
Read More »
A Detailed Overview of Injection Molding Surface Finish
Learn about injection molding surface finishes, their types, and key factors. Fecision offers quality injection molding with finishing support.
Read More »
Common Plastic Joining Techniques for Your Projects
Learn effective plastic joining techniques for connecting plastic parts. Explore common methods and key considerations for choosing the best connection technique for your needs.
Read More »
ISO Certifications for Plastic Injection Molding
Discover the importance of ISO certifications for plastic injection molding and how they ensure quality standards in custom plastic injection molding services for various industries.
Read More »
ISO 10993: Biocompatibility Standards for Medical-Grade Silicone
ISO 10993 biocompatibility testing for medical-grade silicone: cytotoxicity, sensitization, hemocompatibility, and the ISO 10993-1:2025 sixth edition risk-based update explained.
Read More »
Perfecting Molding Effects: Mold Flow Analysis as a Critical Tool
Unlock the full potential of your production process with Mold Flow Analysis. This crucial tool can boost product quality, save costs, and raise productivity.
Read More »Let’s Start!
Together, we can make something remarkable!
Let us turn your vision into reality. Provide us with your project details, and we’ll create a customized proposal designed specifically for you.
Get A Quote